Router Table Coping Sled Rail Coping Sled with Clamps for Precise Front Joint Cutting of Cabinet Doors and Drawer

Features 1The Rail Guide Coping Sled is an indispensable tool for making precise square clean cuts for door and drawer fronts 2When building cope and stick door and drawer fronts one of the tasks that must be done is to cut the end grains of your rails This sounds easy enough however the narrower your rails are the more difficult it is to hold the stock firmly up against a router table fence Our 3Rail Guide Coping Sled solves this issue and helps you make precise square clean cuts for rail and style doors drawer fronts and most any other type of end grain cut on your router table 4The idea behind the Rail Guide Coping Sled is simple hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutting machine for the cleanest squarest cuts possible When doing drawer fronts which Regular times use very narrow rails this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm 5We have included a single sacrificial block with the sled to get you started with your first profile The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts Also included is an abrasive strip that is adhered to the adjustable fence The abrasive strip keeps your stock from sliding or wandering during the coping process That along with the heavy duty hold down toggle keeps your stock firmly in place 6Many sleds rely on the miter slot for reference Our copin